Professional Nail Drill – Elegance

Professional nail drill – Elegance.

CLA-106.

Safety and Hazard Instructions

1. Ensure that the voltage matches the voltage indicated on the machine.
2. When the machine is not in use, turn off the power switch and unplug the cable from the power source.
3. Do not spray water on the device.
4. If the power cord is damaged, it must be replaced only by an authorized service center of the importer/manufacturer to avoid risk.
5. Keep the machine out of the reach of children; do not allow children or anyone not qualified to use the device.
6. Do not use the machine if there is damage to the cable or any other part of the machine.

Maintenance Suggestions
1. Replace the handpiece carbon brushes once a year.
2. Ensure that the handpiece is kept clean and not stored in a dusty place.
3. Clean the machine regularly with a cloth dipped in alcohol; it is important to ensure the inside does not get wet.
4. Do not clean the device with water.
5. The drill bit should be replaced every few months; ensure that the drill bits are not rusting.
6. Operate the machine only at the speed allowed by the manufacturer.
7. In the event the handpiece is dropped, check that the internal parts have not shifted and that the handpiece does not overheat. If it does, send it for repair.